- 164
- 661 443
DN Solutions America
Приєднався 1 бер 2016
Home of Machine Greatness. With DN Solutions' turning centers and machining centers in your corner, you are equipped to make things that change the world.
Our goal. Our challenge to you. Machine Greatness has two meanings around here. The first is simple: DN builds great machines. The second meaning is your call to action: Use your Doosan to machine great things.
• UNBEATABLE MACHINES
There is no broader range or better combination of value, performance and reliability on the planet.
• READY-TO-MOVE INVENTORY
Machining, turning and 5-axis-configured as standard with what top shops need, and all ready for installation.
• STATESIDE PARTS
Get the spare parts you need for any DN machine in a matter of days, not weeks.
• EXPERT SERVICE
Our dedicated team is 100% invested in the productivity, growth and success of your shop.
What you make matters. How you make it matters. So make it great.
Our goal. Our challenge to you. Machine Greatness has two meanings around here. The first is simple: DN builds great machines. The second meaning is your call to action: Use your Doosan to machine great things.
• UNBEATABLE MACHINES
There is no broader range or better combination of value, performance and reliability on the planet.
• READY-TO-MOVE INVENTORY
Machining, turning and 5-axis-configured as standard with what top shops need, and all ready for installation.
• STATESIDE PARTS
Get the spare parts you need for any DN machine in a matter of days, not weeks.
• EXPERT SERVICE
Our dedicated team is 100% invested in the productivity, growth and success of your shop.
What you make matters. How you make it matters. So make it great.
DN House: B&W Trailer
If you want a towing accessory that is built to last, get in touch with B&W Trailer Hitches of Humboldt, Kansas. This DN House cranks out thousands of these highly-engineered products per day to meet the sky-high demand, with help from DN Solutions machines and our partner, Machine Tool Specialities.
www.bwtrailerhitches.com/
www.bwtrailerhitches.com/
Переглядів: 641
Відео
Tool Load Management on a Mill - Know Your DN, Episode 17
Переглядів 59014 днів тому
Our most-requested topic is tool load management on DN Solutions machining centers. Mark Christopher is going over the how-to and all the benefits today. Got a topic you want Mark to cover? Comment below and we’ll add it to the list.
PUMA SMX2600ST - The Swiss Army Knife
Переглядів 88214 днів тому
There are very few machines that singlehandedly act like a high-end machine shop all on their own. The PUMA SMX2600ST is one of them. It’s a 5-axis mill and fully functional CNC turning center all at once, and it gives you permission to make whatever you can dream up.
NHP 5000 + Linear Pallet System - Power Play
Переглядів 11714 днів тому
So much productivity, it’s almost unbelievable. If 24/7 production is what you’re after, pair the NHP 5000 with a Linear Pallet System.
Lynx 2600SY - Largest in the Family
Переглядів 35314 днів тому
Introducing the Lynx 2600SY, the largest model in DN Solutions' bestselling turning center series. If you need more size from your turning center but don’t need to jump up to the PUMA series, the 2600SY has your name on it.
DVF 6500: Amazing 5-Axis Performance
Переглядів 38314 днів тому
The DVF 6500 starts to make a difference the moment it’s installed on your shop floor. It’s fast, compact and automation-ready. Whether you’re just plain tired of multiple setups or you want a lights out automation machine, the DVF 6500 will do years upon years of business-growing work for you.
DHF 8000ST - 5-Axis with Turning
Переглядів 50914 днів тому
The DHF 8000 is a powerhouse of a 5-axis machine, and the new DHF 8000ST adds more bells and whistles to it. With a single table and turning capability to go along with the nodding spindle and large work envelope, this guy is destined to be an immediate favorite on your floor.
PUMA 2600SYII
Переглядів 76914 днів тому
The DN Solutions PUMA 2600SY was engineered specifically for shops that make precision parts out of tough-to-machine materials.
DN Solutions Spindle Service
Переглядів 332Місяць тому
No matter the DN machine you have or the parts you make, our cost-effective and expert spindle service keeps you efficient and productive. • Includes new spindles, replacements and repairs • All services use only high-quality, verified DN Solutions parts • Fast shipping • 20% rebate when you send back your old spindle • Extensive warranty period* Details here: www.dn-solutions.com/us/service/sp...
DN House: Maquinados PASVA
Переглядів 4792 місяці тому
Get to know Maquinados PASVA, a Querétaro, Mexico DN House that's slashing operations in half the time and increasing productivity by up to 30% with DN Solutions machines like the game-changing PUMA SMX. They rely on DN and our strategic partner, Intermaq, for the best machines and support for their complex projects.
DN House: FRISA
Переглядів 8003 місяці тому
FRISA Aerospace in Santa Catarina, Nuevo León, Mexico, has over 50 years of experience in metalworking. Their precise and high-end parts are found all over the world in industries like aerospace, construction and industrial machinery. They achieve their repeatability, reliability and performance with a fleet of DN Solutions machines, including the DHF 8000 and DVF 8000 5-axis machining centers....
DN Solutions DCM Series - Massive Double Column Machining
Переглядів 3,1 тис.4 місяці тому
If you need heavy duty machining, you need a heavy duty machining center. And at DN Solutions, it doesn’t get much more large and in charge than the DCM Series. Get a load of the astounding specs in this video, and visit dn-solutions.com to learn more about this massive double column difference-maker.
DN Solutions America: Machining Perfection
Переглядів 1,1 тис.4 місяці тому
At DN Solutions, we make machines that have the precision, accuracy and reliability to move the world forward. From the smallest medical parts to the most gigantic aerospace pieces, our equipment has a singular goal: machining perfection so people can enjoy a more perfect life. www.dn-solutions.com
DN House: Halcyon Manufacturing
Переглядів 7957 місяців тому
Halcyon Manufacturing is quickly becoming one of the top prototype-first machine shops in the Bay Area. This San Jose, CA shop-led by CEO Tony Doan-has gotten to this point because of its vision: to be a fearless part-maker that has the right partners supporting them. With multiple DN machines including 5-axis DVF vertical machining centers, Halcyon has that support day in and day out. Their ma...
DN House: A to Z Machine
Переглядів 1,7 тис.9 місяців тому
Founded in 1996 in Appleton, Wisconsin, A to Z Machine. Since then, their shop has welcomed roughly 60 CNC machine tools, all with a distinct purpose. In 1997, A to Z got its first DN Solutions machine: a PUMA lathe. With over 20 DN machines now on the floor, featuring performance and reliability from top to bottom. We talked with Marc Manteufel, Manufacturing Engineering Manager at A to Z, to ...
DIMF 2023: The New Era of Machine Greatness is Here
Переглядів 478Рік тому
DIMF 2023: The New Era of Machine Greatness is Here
DN House: Advanced Materials Technologies
Переглядів 1,6 тис.Рік тому
DN House: Advanced Materials Technologies
New Name, Same Greatness: IMTS 2022 with DN Solutions
Переглядів 986Рік тому
New Name, Same Greatness: IMTS 2022 with DN Solutions
Designating Large Tools - Know Your DN, Episode 16
Переглядів 7 тис.2 роки тому
Designating Large Tools - Know Your DN, Episode 16
Setting Up Part Handoffs - Know Your DN, Episode 15
Переглядів 15 тис.2 роки тому
Setting Up Part Handoffs - Know Your DN, Episode 15
Restarting After Program Interruption - Know Your DN, Episode 14
Переглядів 17 тис.2 роки тому
Restarting After Program Interruption - Know Your DN, Episode 14
Using AICC - Know Your DN, Episode 13
Переглядів 10 тис.2 роки тому
Using AICC - Know Your DN, Episode 13
DN Solutions NHP 5000 + Linear Pallet System - Power Play
Переглядів 5 тис.2 роки тому
DN Solutions NHP 5000 Linear Pallet System - Power Play
Tool Life Management Setup - Know Your DN, Episode 12
Переглядів 11 тис.2 роки тому
Tool Life Management Setup - Know Your DN, Episode 12
DN Solutions DHF 8000ST - 5-Axis with Turning
Переглядів 2,7 тис.3 роки тому
DN Solutions DHF 8000ST - 5-Axis with Turning
UNISIG Deep Hole Drilling Systems Finds Huge Value in the TITAN Training Program
Переглядів 1,9 тис.3 роки тому
UNISIG Deep Hole Drilling Systems Finds Huge Value in the TITAN Training Program
1:47 man, that's a classic beast of a machine the puma 2500sy. We have one in our shop as well so fun to operate
Excellent video. We have just purchased this machine and I have been getting to grips with it. Great machine. We also have the Puma 2600 LM with programmable steady and tail stock, also a great machine.
Thank you for your comment! We are glad you like the video.
In my post processor I have the option to turn AICC "off" or on (i can pick levels) or there is the option for "NANO" Can anyone explain what nano does?
Good question! Nano Smoothing is an option from Fanuc that all of our machines come standard with. So, in DN machines when you turn on AICC, NANO Smoothing is automatically turned on. What Nano Smoothing does is take all of those tiny little straight lines in an arc that your cam system generated and turns them into a spline. This allows the look ahead in the control to not try and make every little line appear in your part and gives you that nice finish you are looking for. As for your particular software, I am not sure of why they have the NANO option, but if it were me, I would just use the AICC and know that when I use it, the Nano Smoothing is automatically on. Hope this helps!
@@markchristopher5809 Thanks Mark I appreciate the help
Very good video guys!! Going to try it today
Any idea how to get to the tool data table on an older VC430 w/Fanuc i - series?
Where can I find what aicc is currently set to? And can this code be added to CAM generated programs ?
Luke, that's a great question. AICC comes set from the factory at "R5". As I said in the video the range is from 1-10. When you turn AICC off with the G5.1 Q0, when you go to turn it back on in another program or later in your current program, you have to give it a G5.1 R3 for example. As for your CAM software, different software's allow for this option to be added into your post. It's a menu they can "turn on" so that you can select AICC option levels when you are programming your part. You will need to talk to your CAM distributor if they offer that option.
Where did i found z reference position
hi nice video i like it,can you make a video whats the process of intalling angle head in horizontal boring mill doosan,thanks for the info you shared.
Thanks for the request! We take all of these request into consideration when selecting content for future videos.
I get to "ALL I/O" and I don't see "ALL DATA"???
Is this a new machine you are working on? The older controls did not have this function, that could be your problem. Let me know what year model the machine is.
Is this company formerly known as doosan?
Yes it is! New name, same great machines!
What type of file is used to upload tool pictures? How could you load Mastercam tool library?
Main hmc operator hun retirement Ho to batao
im looking for more videos on the new fanuc I system
where can i find episodes covering the new fanuc I system
May i ask, How much cost LYNX 235ll and LYNX 2105LY? Thanks in advance.
Hello, please visit the following link and fill out the form to request pricing. Someone will respond to your request shortly after you submit it. Thanks! www.dn-solutions.com/us/etc/contactus.do
now i realise how my hurco 5 axis help me lot..
Looks like a Barvius AeroCell 😅
poo
It would be great to have a video on setting up parts ejector, air blast, Parts catcher, coolant flush and setting parts counters/ limiting part runs to certain quantities. A video for lathe accessories and tying this video together for full automation.
Great suggestion! We take all suggestions into account when planning next videos.
Hey, @DNSolutionsAmerica, I love your videos and I'm excited to receive a machine very soon. I just wanted to say it would be very nice to have modern tutorials for the modern version of manual guide i. ESPECIALLY the mill/turn conversational programming. I'm very eager to program parts like what's in the video! Thanks
Noted! Thanks for your comment.
Nice looking machine shop!
Thought you can just push edit...scroll through the programme where you want to start from ...hi light it ..go back to memory and hit the green button ...and it will run from where you highlighted it...
Very good tip. The reason you have to powwr down your CNC is because when you powewr on it will do a Sram data back-up. I also recommendo to unlock your 9000´s programs , so taht way the CNC will back them up also. Best regards.
Hello to you all. What about if the main program is locatted in Data Server? Is it possible to restart it too?
If it wasn't for all the time and money wasted by bad engineering and bad management in this industry, that self driving tool cart might actually be a legitimate savings.
I just laughed at our vertical operator bc of his random tool carousel. The horizontals I use don't have this encumbrance of chasing your tools around the carousel 😂
how can I configure the network?
Need solution for eccentric turning on SMX3100L
Please explain further. Eccentric turning is already possible on a SMX3100L.
푸마 GT2609m 가격을 알수 있나요
Where is this machine made?
Our machines are made in South Korea
Does the g10 method still work on the newer controls?
Yes it does. If you look in this video at the 9:06 mark, I actually go over how to do this with G10. Great question!
❤
whoever filmed and edited this needs a raise
where are you based out of and is this a startup?
Great video. Thanks!
Vx400 z axis and spindle not work sir
Hi, can you show me how to set the Z work offset in G54 using the probe? your video shows X and Y.Thank You,
How to do this if running a canned cycle?
Hello. Unfortunately, you cannot restart the program inside of a canned cycle. You would have to start it at the beginning of the canned cycle. Great question though.
Mind Blowing......👊👍
Could you do a video on changing out tool holders on turret. Specifically live tooling holders.
Bar far one of the best shops around!
Ada rupa orang tanah melayu
Not a very diverse staff
Hi Mark, Can you do some simply how to video's on the ihmi control. For example, how to create graphics blocks for such as on a 4th axis. How to edit or create fixed forms. How to use the tool manager, (make adjustments on screen layouts, adjust wear offsets while machining). etc
Steven, we are shooting new videos very shortly and one of the videos is how to use the tool manager on the iHMI control. Those will be released sometime early next year.
Great stuff
It was an absolute pleasure getting to learn about A to Z's amazing shop, as well as how much strategic thinking goes into how the team conducts business.
It was a great opportunity and experience working with the DN team to produce this video.
For lathe machines the tool call with counter is Txx99, where xx is group number.
100% correct.
Can AICC levels change throughout the program?
Yes. You can program a G5.1 Q1 R(x) anywhere in your program. It is just another G code that he machine digest. However, keep in mind, the command needs to be on it's own separate line and not combined with any other G code. Great question.